THE DATE WILL BE SUNDAY 28 AUGUST. We will try a Fox Hunt again at McAllister Park on Sunday, 28 August, 0900 – 1200. I will be hiding the MicroFox (15mw), and it will be transmitting once a

Good deal, hope it get you working and on the air. Bill On 8/17/2022 7:09 PM, David McGuire wrote:

I got a TS-440S plug on eBay. here’s what I found could be available on eBay for you: - 12V DC Power Cord Cable Car lighter Plug for Kenwood TM-2550A TM-2550E - 4 pin 12AWG DC power cable for

Probably not at Altex as it is a weird connector. Usually find them on eBay too. Pay attention to the orientation of the pins, flat to round sides I think. 73, Gary H. Harmon, Jr. -

Check with Altex. Gary H. Harmon, Jr. - K5JWK HAM Radio, HEATHKIT, and ATARI Archaeologist 6003 Archwood San Antonio, TX 78239-1504 (210) 657-1549 <home> (210) 884-6926 <cell and

Chris https://www.dxengineering.com/parts/kwd-pg-20 https://www.amazon.com/Power-Mobile-KENWOOD-T-Shape-Connector/dp/B015O25TU4 I doubt that you will find it locally. Bill kd2hiq

Hello, I have two Kenwood transceivers and am looking to buy the power supply plugs for them. Mobile-Kenwood TM 2550A HF Transceiver-TS590S Is there anywhere in San Antonio to buy these ?

Attached is a letter from one of our scholarship winners sent to all of the San Antonio Radio Club. It's also posted on our web site

Bill, When we built this house I put two cutouts in my office to get outside (for antennas). I also had them put three inch flex tubing (two of them) through the walls into the attic

I ran my coax through a gable vent (with drip cap PVC) in the attic. Then drilled holes through the top plate of the walls to my office, feed the coax to a box in the

Bill, how about 2" white PVC pipes and using grey PVC sweeps at the turns (or grey all the way). that was I used at my house in Universal City to get from the roof into the radio room wall outlet

I got an inquiry about a ham planning for a new house and ways to get antenna wires, etc inside. He considered the window feed through panel, but is there something else he could use? Any suggestions

I have 3 large & 3 (2xl) white tee shirts left - you can buy for $10 at this month's meeting. Cash & carry. Bill KD2HIQ

Hello SARC Tonight's Livestream starts at 7pm CDT (00:00 UTC Monday) Tonight I'll be practicing more CW and I have invited several guests onto the stream to join me. I had alot of great feedback

Travis, There's a ham here in Delaware that's interested in fox hunting, so I'll pass the specs on the micro fox along to him. Good hunding! Pete, KC3MVS

We will try a Fox Hunt again at McAllister Park on Saturday, 28 August, 0900 - 1200. I will be hiding the MicroFox (15mw), and it will be transmitting once a minute on 146.565Mhz. Hunter's

I think it comes down to your operating style. There are a couple ways to do POTA: 1. You lug your gear from a car to a picnic bench nearby. Lots of options for lugging here depending on how much

Dang. I had a detailed reply that may have gotten eaten by the system. :) Maybe it shows up later. Here's a retelling... I think it depends on your activation style. Will you be lugging your gear from

Sam, I use a Nanuk 923 pelican like case to transport my 7300. It’s just big enough for the radio, DC power cable, and microphone.

Hi all, I’ve been meaning to put together some sort of solution for me to easily and safely haul my Icom 7300 from place to place, so I can get some more use out of it once the weather gets more